February 4, 2020

KONICA MINOLTA QMS MAGICOLOR 2200 DRIVER

A-2 Installation Transporting Before moving the printer, always remove the drum cartridge, toner cartridge, media, and any optional equipment. The screw from the left side has a serrated washer. Replace the paper exit unit. Remove the 1 set screw for timing roller solenoid connector. Image transfer roller Charge removal plate Charge removal bias Image transfer bias C Temperature and humidity sensor The temperature and humidity sensor HS1 is located inside the lower rear of the unit.

Uploader: Togis
Date Added: 23 July 2010
File Size: 53.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 25245
Price: Free* [*Free Regsitration Required]

Grab the handle on the right end of the front center cover and pull towards you. Does the belt cleaner motor operate during print- ing? Toner empty-detecting sensor port This port detects whether or not mniolta toner cartridge has toner in it.

Replace the duplex unit. Remove the upper cover. Find out more here.

Remove HV1 mounting plate with HV1 attached. The image on the image transfer belt is transferred to the paper when the image transfer bias that is supplied by HV2 is applied to the image transfer roller. OPC drum, toner cartridges, image transfer belt unit and fusing unit. Dette er en halvleder laser. The GN is worth the extra money if you consider it probably will minnolta the last printer you’ll purchase for years to come.

Remove the 1 3 set screws for the rear cover.

  MSI 7312 AUDIO DRIVER

: Customer reviews: Konica Minolta magicolor Color Laser Printer

Vacuum excess toner from the inside ninolta the printer with a toner vacuum. Compare the print quality of a printed page with that of a test print. Remove the 1 mounting screw for the rack turning knob and remove the turning knob. Carefully listen to and understand the user’s description of the problem. Refer to ” Upper tray” on the previous page for details about other design and function items.

Remove the cover for the paper take-up section. Can’t find my model. Each 2020 of SW1 switches in following sequence: It is used to turn the rack and align each monica the color cartridges with the removal port.

Check the paper type. Image transfer roller Charge removal plate Charge removal bias Image transfer bias C Temperature and humidity sensor The temperature and humidity sensor HS1 is located inside the lower rear of the unit.

While pressing SW1, move the mode setting switch from off to on. Black and whites look great. Osynlig laserstraining nar denna del ar oppnad och sparren ar urkopplad. There are 3 connectors.

Konica Minolta Magicolor 2200 Series Black Toner Cartridge 1710471-001

Comb electrode Scorona system charger for providing a minus charge to the sur- face of the OPC drum. If the paper take-up has not been qmss performed, it is detected as a paper jam misfeed. The waste toner remaining on the OPC drum after the transfer of the toner image is scraped off by the cleaning blade, collected by the waste toner collection coil, and transported to the waste toner container.

  DLINK 538TX LAN DRIVER

There is no paper any- where. Printing is done on the front of the first sheet and the front of the second sheet, the back of the first sheet and the back of the second sheet, the front of the third sheet and the front of the fourth sheet, the back of the third sheet and the back of the fourth sheet, and so on.

Weight including accessories Operating environ- ment: Remove the 1 set screw for the rack home position sensor for black toner and the 1 connector to remove the sensor. Image transfer belt cleaner Removes the residual toner on the image transfer belt after the visible image has been transferred to the paper.

When the paper is A4 size or larger and when the paper has been discharged to the paper exit tray of the printer immediately preceding. There was a problem filtering reviews right now.